Battery Charger Staudte Hirsch SH-3.120, 6 V/12 V, 1 A

Advantages of the intelligent, multi-step charging

The fully automatic multi-step charging method guarantees that your battery is charged fully and gently in the shortest possible time and according to its type.
 

Mode	Specification
6 V Lead	Battery type: 6 V lead-acid, lead-gel, AGM, from 1.2 Ah Charging current: 1 A Cut-off-voltage: 7.2 V
12 V Lead	Battery type: 12 V lead-acid, lead-gel, AGM, from 1.2 Ah Charging current: 1 A Cut-off-voltage: 14.4 V
12 V Lithium	Battery type: 12 V LiFePO4 with BMS, from 1.2 Ah Charging current: 1 A Cut-off-voltage: 14.4 V

 

---

 

Regeneration step for the reactivation of deep discharged batteries

When a battery is connected to the charger, the device first determines independently what the charging status of the battery is (deep discharged, partially discharged). If the battery is detected as deep discharged, the charging process will automatically start in regeneration mode. A lower charging current is used to bring the deep discharged battery back to a voltage at which the regular charging function can be started. Should this be no longer possible, the battery is detected as defective and the error is indicated by an optical signal.
 

---

Float charging phase – ideal for longer periods of inactivity

Thanks to the float charging phase included in the multi-step charging process, the battery capacity is constantly monitored, optimally recharged if necessary and capacity losses due to self-discharge are compensated immediately. This fully automatic feature guarantees the instant operability of your vehicle at all times and ensures that your battery is fully efficient even after long periods of inactivity.
 

---

Safe operation – protection against short circuit, reverse polarity and overcharging

Defective, short-circuited or reverse-poled rechargeable batteries are automatically detected by the charger and indicated by visual warning signals.
 

---

Integrated: auto-memory function

The auto-memory function ensures that the battery charger returns automatically to the previously selected mode after power is restarted following a supply voltage failure.
 

---

Included charging adapters – Conveniently connect and exchange

The 2-piece, water-protected (IP 44) adapter cable set, which is included in the delivery content, allows for a versatile and flexible use


Simply connect and exchange
Thanks to the quick-contact plug, the required adapter cable can simply be connected to the charger cable and, if necessary, replaced with another one.


Adapter cable with battery clamps
By means of the completely isolated batteryclamps, the charger can be quickly and safely connected to or disconnected from the battery.
To the product >


Adapter cable with eyelet rings
It can be permanently connected to hard-to-reach batteries. Advantage: The eyelets only have to be fixed to the battery once. After that, the charger can be connected to e.g. the motorcycle with little effort using the quick-contact plug. (Diameter eyelet rings outside 12 mm, inside 6.5 mm).
To the product >

These and other adapter cables can also be ordered separately.